Valve actuator is a kind of electronic machinery products, with VB-3000 series valve. It can also be matched with other valves through different connectors.
A valve driver is a device used to operate a valve and connect it to a valve. The device can be driven by a power source of manual, electric, pneumatic, hydraulic or combination forms, Valve Control Actuators and the motion process can be controlled by the size of stroke, torque or axial thrust.
Valve actuator for connecting PLC and Valve, includes the drive housing and the valve block set in the drive enclosure, the quick-switching solenoid valve, the feedback shaft, the transmission gear, Valve Control Actuators the potentiometer and the feedback circuit board; the drive enclosure and the valve block are all provided with the stoma of each other, and the quick switch solenoid valve is integrated on the valve block.
Valve Drive Performance
1. Strong applicability, not affected by ambient temperature
2. Wide range of output torque
3, easy to control, can freely use DC, AC, shortwave, pulse and other signals, Valve Control Actuators suitable for amplification, memory, logic judgment and calculation work
4, can realize ultra miniaturization
5. Mechanical Self-Locking
6. Easy installation
7. Convenient Maintenance and Repair
Valve Drive Features
Synchronous reversible motor with low AC voltage, magnetic clutch.
The movement utilizes the gear transmission, the output gear screw group uses the plane rolling bearing which revolves around the center axis to support, the valve axle uses the central screw sleeve connection as well as the locating ruler.
Valve movement Position indicator.
Two auxiliary switches and manual control levers can be attached.
Suitable for 15mm, 17mm or 19mm, 22mm travel. Valve Control Actuators A jumper is selected for the incremental feedback type or for the stroke used in the column control type.
Positive proportional 0-10v or 4-20ma DC control more available jumper selection forward or reverse operation.